1000 Fps - CS 1.6 [PC High Performance]

1000 Fps - CS 1.6 [PC High Performance]

Download Now

Counter Strike Lowping cFg FiLes No-Loss,No-Choke

Counter Strike 1.6 Lag CFG Files

The CFG Files includes

1.autoexec.cfg

2.violence.cfg

3.userconfig.cfg

4.Reduce Lag.cfg

5.pingboost.cfg

6.ping.cfg

Download

How to patch the server for Non Steam users 47 and 48 protocol

In order to patch the server do these steps:

1. Download the CS 1.6 Non Steam 47+48 protocol patcher and unzzip it . Copy the files to your main directory (where hlds.exe is).

2. Open cstrike\server.cfg and add these lines:

Don`t forget to set the sv_lan 0 in server.cfg.

16 steps to reduce the lag on the server!

- Step 1 - The firs step is that the server has "Realtime" priority.
Start the server, press CTRl + Alt + Del, click Processes, find hlds.exe in the list, and right click on it, Set Priority - Realtime.

- Step 2 - The second step is:
- Go o the hlds.exe folder (from where you have opened the server), make a shortcut to the hlds.exe, then you will find in the same folder another file "Shortcut to hlds". Right click on this one, press Proprieties, and in the first raw you have Target, and there yo have something like HDD:\location\hlds.exe .
Now add -console -game cstrike -pingboost 3 +sys_ticrate 1000 +heapsize 250000 +maxplayers 20 +map de_nuke.

- Step 3 - the third step is to install HL Booster

- Step 4 - Step 4 is for more quick change of the map:
- Enter the cstrike folder, where you have the installed the server , find the custom.hpk file and remove it for good.

- Step 5 - Can be used as a script for rates:
Code:
alias "dslow" "sv_minrate 2500;sv_maxrate 2500;sv_minupdaterate 5;sv_maxupdaterate 5;echo dead slow"
alias "vslow" "sv_minrate 3500;sv_maxrate 3500;sv_minupdaterate 13;sv_maxupdaterate 13;echo very slow"
alias "slow" "sv_minrate 3500;sv_maxrate 5000;sv_minupdaterate 14;sv_maxupdaterate 14;echo slow"
alias "norm" "sv_minrate 3500;sv_maxrate 7500;sv_minupdaterate 15;sv_maxupdaterate 15;echo normal"
alias "fast" "sv_minrate 3500;sv_maxrate 9999;sv_minupdaterate 20;sv_maxupdaterate 20;echo fast"
alias "vfast" "sv_minrate 3500;sv_maxrate 20000;sv_minupdaterate 20;sv_maxupdaterate 60;echo LAN fast"
alias "rates" "sv_minrate;sv_maxrate;sv_minupdaterate;sv_maxupdaterate"

Add the file server.cfg to the script, in the cstrike folder where you have installed the server.
Usage: After you have started the server, write in the console what setting you want, considering the type of internet connexion you have, and also considering the type of computer that you keep the server on. For exemple, if you have a server on lan, write in the console vfast, or if you have a server where you have players in the same network you can use fast or norm. You can acces this script by "rcon" considering the variation of the lag on the server. you should not have any setting about the rate in server.cfg, listenserver.cfg, game.cfg, settings.cfg, amx.cfg etc.

- Step 6 - It refers to some setings that you should add on the server.
- You have the following settings:
Code:
log off
sv_logbans 0
sv_logecho 0
sv_logfile 0
sv_log_onefile 0
mp_logmessages 0
mp_logdetail 0
sv_unlag 1
sv_maxunlag .1
fps_max 600

You shoul add these settings in server.cfg .

- Step 7 - It refers to some settings that you should use considering the type of internet connexion you have.
Code:
// Modem 56k //
rate 5000
sv_rate 5500
sv_cmdrate 40
sv_cmdbackup 2
sv_updaterate 45
mp_resend 2
sv_dlmax 40
mp_decals 50

Code:
// 128k //
rate 10000
sv_rate 10000
sv_cmdrate 60
sv_cmdbackup 3
mp_updaterate 60
sv_resend 2
sv_dlmax 100
mp_decals 100

Code:
// 256k //
rate 12000
sv_rate 12000
sv_cmdrate 101
sv_cmdbackup 4
sv_updaterate 101
sv_resend 3
mp_dlmax 256
mp_decals 100

Code:
// 512k //
rate 15000
sv_rate 15000
sv_cmdrate 80
sv_cmdbackup 4
mp_updaterate 45
sv_resend 3
mp_dlmax 400
mp_decals 100

Code:
// 1024k //
rate 20000
sv_rate 20000
sv_cmdrate 80
sv_cmdbackup 6
mp_updaterate 80
sv_resend 6
mp_dlmax 800
mp_decals 300

Code:
// 2048K //
rate 25000
sv_rate 25000
sv_cmdrate 101
sv_cmdbackup 6
sv_updaterate 101
sv_resend 6

Code:
// DSL High //
rate "12001.000521"
sv_rate "9999"
sv_latency "-21.000521"
sv_updaterate "160"
sv_cmdrate "40"
mp_resend "2"
mp_cmdbackup "2"
sv_dlmax "768"
ex_interp "0.01"
ex_extrapmax "10"

Code:
// DSL Low //
rate "9001.000521"
sv_rate "9999"
mp_latency "-51.000521"
mp_updaterate "67"
sv_cmdrate "40"
sv_resend "2.5"
mp_cmdbackup "51"
mp_dlmax "512"
ex_interp "0.05"
ex_extrapmax "4"
cl_dlmax 800
mp_decals 300

Code:
// qDSL //
rate "15001.000521"
cl_rate "9999"
cl_latency "-16.000521"
cl_updaterate "101"
cl_cmdrate "400"
cl_resend "1.5"
cl_cmdbackup "2"
cl_dlmax "1024"
ex_interp "0.01"
ex_extrapmax "10"

You should add these settings in server.cfg, but not all of them. Add only the ones you think you need!!!

- Step 8.
In step 8 you will learn some Windows settngs:
- Right click on My Computer, press Properties, click up on the Advanced, and in Performance, click Settings and do like in the image below:

- Step 9 - About the optimization of some processes, and how to disable the unuseful ones.
- Press the Start button, click Run... and write regedit, then press [+] from HKEY_LOCAL_MACHINE, than press [+] from SYSTEM, then press [+] from CurrentControlSet, then [+] from Control, than press [+] from Session Manager and then press on Memory Management. In the right you will have a list with some registers.
Double click DisablePagingExecutive and at Value data change the 0 with 1.
- In order to stop the unusefull processes:
Press Start, clik Run and write msconfig. A window will apear, click on Services and click the ones you do not need. Also, press Startup and click on those you think you do not need.

- Step 10 -
- Click on Start, press Run... and then write gpedit.msc. Under Computer Configuration press the [+] from Network, and then press QoS Packet Scheduler and you will have a lst in the right, where you can make some settings. Double click on Liit reservable bandwith, then mark Enabled and change rom 20% to 0% at the Bandwith limit. Then click Apply and OK.

- Step 11-
- Right click on the Desktop - Properties - Apperance - Effects. In this window, only the raw Hide underlined letters... should be marked.

-Step 12 -
- Click Start - Run and write Sigverifexe. Then press Start.

- Stept 13 - 
- Go to Control Panel and then Administrative Tools - Services. Right click - stop on the following:
Application Management
Clipbook
Error Reporting
Distributed Link Tracking Client
Help and Support
Indexing
IPSEC
Messenger
Remote Registry Service
Telnet
Windows Time
WMI Performance Adapter

- Step 14 -
- Go to Start - Run and write regedit. Then go to HKEY_LOCAL_MACHINE\SYSTEM -> CurrentControlSet -> Control -> Session Manager -> Memory Management -> PrefetchParameters. Then enter the EnabePrefetcher and set the value 3. 

-Step 15 -
- Enter Start - Run and write regedit. Then go to HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> Control -> PriorityControl. In the right press New - DWORD Value. Write IRQ8Priority. Then press Modify and put the value 1. 

- Step 16 -
- Use the "TCP Optimizer" software in order to optimize the internet. It is a good software that I tested.

                                                                     ThankYou!

alx_low ping 1.7

This is an unlag software whcih makes your server lag free .!!!

                                                     Download alx_low Ping rar

HL-Booster 2.4

From This Your Server Will Run Lag Free WE Hop!!!

                                                            Download HL-Booster 2.4

Enjoy iT!!!

Want To Make Server Lag Free

Here Is The Solution!!!there are some commands which you have to submit in console when you connect/oppen the Serverlog offsv_logbans 0sv_logecho 0sv_logfile 0sv_log_onefile 0mp_logmessages 0mp_logdetail 0sv_unlag 1sv_maxunlag .1fps_max 600
And This You Have to Put By watching Your Network Connections!!

it  refers to some settings that would need to use depending on what type of internet you have. Code: / / Modem 56k / / rate 5000 5500 sv_rate sv_cmdrate 40 sv_cmdbackup 2 sv_updaterate 45 mp_resend 2 sv_dlmax 40 mp_decals 50 Code: / / 128k / / rate 10000 10000 sv_rate sv_cmdrate 60 sv_cmdbackup 3 mp_updaterate 60 sv_resend 2 sv_dlmax 100 mp_decals 100 Code: / / 256k / / rate 12000 12000 sv_rate sv_cmdrate 101 sv_cmdbackup 4 sv_updaterate 101 sv_resend 3 mp_dlmax 256 100 mp_decals Code: / / 512k / / rate 15000 15000 sv_rate sv_cmdrate 80 sv_cmdbackup 4 mp_updaterate 45 sv_resend 3 mp_dlmax 400 100 mp_decals Code: / / 1024k / / rate 20000 20000 sv_rate sv_cmdrate 80 sv_cmdbackup 6 mp_updaterate 80 sv_resend 6 mp_dlmax 800 300 mp_decals Code: / / 2048K / / rate 25000 25000 sv_rate sv_cmdrate 101 sv_cmdbackup 6 sv_updaterate 101 sv_resend 6 Code: / / DSL High / / rate "12001.000521" sv_rate "9999" sv_latency "-21.000521" sv_updaterate "160" sv_cmdrate "40" mp_resend "2" mp_cmdbackup "2" sv_dlmax "768" ex_interp "0.01" ex_extrapmax "10" Code: / / DSL High / / rate "9001.000521" sv_rate "9999" mp_latency "-51.000521" mp_updaterate "67" sv_cmdrate "40" sv_resend "2.5" mp_cmdbackup "51" mp_dlmax "512" ex_interp "0.05" ex_extrapmax "4" cl_dlmax 800 300 mp_decals Code: / / qDSL / / rate "15001.000521" cl_rate "9999" cl_latency "-16.000521" cl_updaterate "101" cl_cmdrate "400" cl_resend "1.5" cl_cmdbackup "2" cl_dlmax "1024" ex_interp "0.01" ex_extrapmax "10" Add these settings in server.cfg, but not all! place that you think you need.

Thanks For Watching!!!!